注册 登录
美国中文网首页 博客首页 美食专栏

utihakou的个人空间 //www.sinovision.net/?582062 [收藏] [复制] [分享] [RSS]

分享到微信朋友圈 ×
打开微信,点击底部的“发现”,
使用“扫一扫”即可将网页分享至朋友圈。

How to Solve SVCI J2534 "Unregistered software. Expired data: XXX" Err

已有 1356 次阅读2020-5-13 22:57 |系统分类:科技教育| SVCI, J2534 分享到微信

Customer Problem: When I was using SVCI J2534 device, it pops up a warning message with the words “Unregistered software. Expired date: 2019.7.12” as shown in the picture below.


Solution offered by eobdtool.co.uk engineer:
Don’t worry! The warning message is a reminder that you need to upgrade your software to the latest version. Please follow the steps below to operate.

Step 1: Uninstall the current IDSFord/IDSMazda software and Ford/Mazda Quickloader software
Step 2: Download the latest IDSFord/IDSMazda, SVCI J2534 Ford/Mazda Quickloader and IDS_VCI (Ford/Mazda) driver from http://flyobd.com/shop/download-center/



Step 3: Install the newest software above you had to download
Then you can run IDSFord/IDSMazda software from Quickloader directly.

Here is FVDI J2534 IDS V110 software installation video for reference:

  

Please kindly notice:
If you still cannot solve your SVCI J2534 problem with the solution above, and get the error message “Load IDS software failed. Maybe IDS has not been installed. Please install IDS at first.”

The main reason for the new problem is that you didn’t install IDS_VCI driver, please read step 2 carefully.

Tech support: https://www.eobdtool.co.uk/
Article source:http://blog.eobdtool.co.uk/how-to-solve-svci-j2534-unregistered-software-expired-data-xxx-error/

免责声明:本文中使用的图片均由博主自行发布,与本网无关,如有侵权,请联系博主进行删除。







鲜花

握手

雷人

路过

鸡蛋

评论 (0 个评论)

facelist

您需要登录后才可以评论 登录 | 注册

 留言请遵守道德与有关法律,请勿发表与本文章无关的内容(包括告状信、上访信、广告等)。
 所有留言均为网友自行发布,仅代表网友个人意见,不代表本网观点。

关于我们| 节目信息| 反馈意见 | 联系我们| 招聘信息| 返回手机版| 美国中文网

©2024  美国中文网 Sinovision,Inc.  All Rights Reserved. TOP

回顶部