||
A customer said that he had just received the software hard drive of VXDIAG VCX SE Benz, but when he was running the software on the computer, the computer showed a blue screen and error code 0141. He asked if the hard drive was broken. How to deal with it quickly?
Eobdtool.co.uk gave the solution as below.
That's a hard disk format problem. Please try to solve it using the following methods.
Method 1:
1.Boot the computer and press F2
Note: the specific key to press is subject to the customer's computer. In general, press F2 is ok. But some computers may press F1
2.Enter the BIOS mode to set the hard disk format to AHCI
3.Press F10 to save and exit (important!!!)
4.Restart the computer
Method 2: Enter PE to do boot fix via USB HDD
Boot the computer
Press F12 to enter the Boot menu
Select USB- HDD (such as TOSHIBA TransMemory- (USB 2.0), and press “Enter”
Select boot PE system (such as boot Win10 X 64 PE (2G above)
Open Boot fix
Select the BIOS (MBR Disk Boot Partition), and press “OK”
Fix successfully.
For further problems, please feel free to contact us.
WhatsApp/ Hot line: +86 159 7293 3706
Skype: Eobdtool.co.uk
Email: sales@eobdtool.co.uk