切换至摄影模板
博文
Solution: CG FC200 Clone AUDI VAG TEMIC DL382 TC1784
||
This post takes AUDI VAG TEMIC DL382 TC1784 as an example to see how the CG FC200 programmer can clone the Audi gearbox computer operation by reading and writing DFlash, EXT DFlash and PFlash data.
Please Kindly notice:
◎FC200 software requires authorization before use
◎Click Authorization Information button on the main interface to view the authorization list
◎Click the Update Authorization button
◎If "No" is still displayed after updating authorization, please contact eobdtool.co.uk customer service.
The operation guide:
Connect FC200 to AUDI DL382 gearbox via the professional cable, and connect to the computer via USB cable
The wiring diagram can be found in the CG FC200 software
Run CG FC200 software
Select AUDI
If you are not sure which ECU it is, check the model on the gearbox, and input it in the search box.
Then click 'Platform'
Click 'Identification' to read the gearbox info
-This function can help us to check whether the communication of the module is normal and the wiring is correct.
Then click 'Read DFlash', 'Read EXT DFlash' and 'Read PFlash' to read the corresponding info and save it in sequence
After backup data successfully, go to write DFlash, EXT DFlash and PFlash in sequence.
It's easy to do, just follow the prompt on the screen to perform.
When the data writing process is completed, that means the gearbox has been cloned successfully. Just install the gearbox back to the vehicle, and turn the ignition on to test.
Alright, that's the whole process of AUDI gearbox clone with CG FC200 programmer. No need to do matching and online programming.
CG FC200 ECU Programmer is coming soon!
Learn more info, please check
Please Kindly notice:
◎FC200 software requires authorization before use
◎Click Authorization Information button on the main interface to view the authorization list
◎Click the Update Authorization button
◎If "No" is still displayed after updating authorization, please contact eobdtool.co.uk customer service.
The operation guide:
Connect FC200 to AUDI DL382 gearbox via the professional cable, and connect to the computer via USB cable
The wiring diagram can be found in the CG FC200 software
Run CG FC200 software
Select AUDI
If you are not sure which ECU it is, check the model on the gearbox, and input it in the search box.
Then click 'Platform'
Click 'Identification' to read the gearbox info
-This function can help us to check whether the communication of the module is normal and the wiring is correct.
Then click 'Read DFlash', 'Read EXT DFlash' and 'Read PFlash' to read the corresponding info and save it in sequence
After backup data successfully, go to write DFlash, EXT DFlash and PFlash in sequence.
It's easy to do, just follow the prompt on the screen to perform.
When the data writing process is completed, that means the gearbox has been cloned successfully. Just install the gearbox back to the vehicle, and turn the ignition on to test.
Alright, that's the whole process of AUDI gearbox clone with CG FC200 programmer. No need to do matching and online programming.
CG FC200 ECU Programmer is coming soon!
Learn more info, please check
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
上一篇:
Free Download: SVCI J2534 Mazda IDS V124
下一篇: Iprog+ Pro V87 Free Download+ Install on Win7/Win10
下一篇: Iprog+ Pro V87 Free Download+ Install on Win7/Win10
全部作者的其他最新博文
- • OBDSTAR X300 Classic G3(Key Master G3) Read VW MED17.5 TC1766 Guide
- • OBDSTAR X300 Classic G3 Repair Toyota SAS on Bench
- • How to Unlock Toyota Genuine/OEM Chip Type 8A Keys by Lonsdor K518 Pro Key Progr
- • Launch X431 ECU Programmer Clone KIA MEG17.9.12 TCU on Bench
- • Launch X431 CRP919E BT Elite Program Tire Size on 2017 RAM 1500 SLT
- • OBDSTAR DC706 Clone VW SIMOS18.10 & SIMOS10.22 ECMs by Boot Tutorial
