Question: Which tool can read and write Mini/BMW EDC17C50 Engine ECU on bench? Here is the suggestion from eobdtool.co.uk engineer. Both foxflash ECU programmer and ALIENTECH Kess3 can do that. Two tools are able to read/write ECU/TCU via OBD, OBDvr, bench and boot mode. The ...
How to clone EDC16U1 VW Golf 1 9TDI Engine ECU with ALIENTECH Kess3 ? There is the related connection diagram and operation guide in the Kess3 software, which makes you clone the ECU easier. Instruction: 1.Remove the ECU from the vehicle 2.Open the ECU being careful not to damag ...
Customer problem: After I updated my Lonsdor K518 Pro , it only booted to this screen, and cannot work normally. Eobdtool.co.uk engineer replied: Please uninstall the old APK, and update K518 Pro again. Operation steps: Long press the third icon on the K518 Pro Key Programmer ...
KYDZ MLB Tool is able to calculate MLB data and generate dealer key to Audi VW Porsche Bentley Lamborghini. No need to get in a car to collect, you can use the original MLB key. The key generated can be used to work with Lonsdor K518 Pro /K518 series key programmers or 5C OBD Helper (in ...
Alientech launched 3 versions of ECM TITANIUM software for Kess V3 : full version , full promo version (full promotion version) and credit version . What’s the difference? How to choose? Check more details in this post. What is ECM TITANIUM software? This mapping software is made b ...
What’s the difference between ALIENTECH KESS V3 and Autotuner tuning tool? Which one is better to choose? Let’s take a look at each of them. The main difference: Autotuner only supports German car brands via OBD. There is less ability for bench and boot, only supports power upgrades, a ...
foxFlash OTB 1.0 Expansion Adapter can be used with Foxflash ECU Programmer to read and write ECM, TCM, ACM, DCM via OTB mode (OBD mode via bench pinout ). Here eobdtool.co.uk shares the guide to find the Pinout for this OTB Adapter. 1.Open the foxflash Manager installation folder, an ...
Question: Is it possible to add BMW CAS2 Semi Smart Key with Autel IM608/ IM608 II and Godiag CAS2 CAS3 Test Platform ? Here is the clue. Autel MaxiIM IM608 II cannot read data by connecting CAS1/CAS2/CAS3/CAS3+/ CAS3++ via OBD directly. The device will be unable to communicate wi ...
Tutorial: How to use Foxflash ECU Programmer and OTB 1.0 Expansion Adapter to read and write Mercedes-Benz CRD3 ECU via OBD driver? What is foxFlash OTB 1.0 Expansion Adapter ? http://blog.eobdtool.co.uk/what-is-foxflash-otb-1-0-expansion-adapter/ Foxflash OTB Adapt ...
Use GODIAG BMW CAS1/CAS2 Mech-Key Test Platform to work with Xhorse VVDI Key Tool Plus Pad to add new mechanical key to CAS2 module perfectly. 1.Connection: Connect VVDI Key Tool Plus and Godiag CAS1 CAS2 Test Platform via OBD2 to DB25 Cable Connect the green and black connecto ...