注册 登录
美国中文网首页 博客首页 美食专栏

utihakou的个人空间 //www.sinovision.net/?582062 [收藏] [复制] [分享] [RSS]

分享到微信朋友圈 ×
打开微信,点击底部的“发现”,
使用“扫一扫”即可将网页分享至朋友圈。

2M2 Magic Tank Create Keys by Camera for HY22 Laser Key

已有 135 次阅读2020-12-2 21:22 |系统分类:科技教育| 2m2, magic, tank, app 分享到微信

V2020.09 2M2 Magic Tank (X6 PLUS) expands powerful functions. With the super key, it can generate 95% of car keys. This post will share the guide to cut a new key for HY22 using the new function- Create Keys by Camera.
2m2 magic tank app

Make sure you have downloaded 2M2 Magic Tank APP 

Connect 2M2 Magic Tank key cutting machine with Android mobile phone via Bluetooth

Run 2M2 APP

Go to “Create Keys by Camera” function

Then you will see the instruction:

Here is to use 2M2 super key blank to create key blank or new keys by camera, and save all the key shape data that you get in the database (My key).

The super blank key incl. L series, S series and T series

There are many laser key types are supported, such as laser key 1 inner side/with shoulder, laser key 2 inner sides /with shoulder, laser key 1 outer side/with shoulder, laser key 2 outer sides.

Here select “laser key 2 inner sides”

Tick “yes” for the options depends on features, then press “NEXT”

Please kindly notice:

The following operation steps are very important, please follow the instruction on the screen to do step by step:
-Prepare auxiliary tool and loosen the handwheel.
-Fix the customer key
-Tighten the handwheel

Then adjust the key position in the picture and rotate the key to parallel with the horizontal line.

Pull the blue line to overlying the blue line on the clamp and pull the red line to overlying the red line on the clamp

Pull the red line to touch the tip of the key
Pull the blue line to overlying the first cut of the key
Pull the green line to overlying the last cut of the key
2m2 lines

Pull the red line to touch the tip of the key
Pull the yellow line to overlying the edge up the key
Pull the blue line to overlying the edge up to the groove
2m2 lines

Pull the red line to overlying the tip of the key
Pull the blue line to overlying the edge of up and down groove

After that, fix the key on the right, and fix the key depend upon the red mark line
Pay attention to the red mark line.

Then start

Start to find bittings, don’t remove the key
2m2 find bitings

Put a new 2m2 magic tank S series key blade to cut
It will take about 2-3 minutes to cut four sides of the key
2m2 cut key sides

Cut the new laser key successfully
2m2 cut keys

Related posts:
2020 New 2M2 Magic Tank Key Cutting Machine User Guide
2M2 Magic Tank 2020 Newest Upgrade: One Super Key Blank Generate 99% Keys
2020 Newest 2M2 Magic Tank Locksmith Tools










鸡蛋

鲜花

握手

雷人

路过

评论 (0 个评论)

facelist

您需要登录后才可以评论 登录 | 注册

 留言请遵守道德与有关法律,请勿发表与本文章无关的内容(包括告状信、上访信、广告等)。
 所有留言均为网友自行发布,仅代表网友个人意见,不代表本网观点。

关于我们| 节目信息| 反馈意见 | 联系我们| 招聘信息| 返回手机版| 美国中文网

©2021  美国中文网 Sinovision,Inc.  All Rights Reserved. TOP

回顶部