博文
How to Clone Benz VGS2 FCVT/ VGS2-FDCT TCM with OBDSTAR DC706 on Bench?
OBDSTAR DC706 with TCM V30.09 can perform EEPROM and Flash read & write operation on Mercedes- Benz GETRAG VGS2-FDCT/ VGS-FDCT/ VGS2-FCVT and BOSCH VGS NAG3 (9G TRONIC) on bench.
| Brand | ECU Brand | Type | Dump | Read eeprom | Write eeprom | Read flash | Write flash | Connection Method |
| BENZ | GETRAG | VGS2-FDCT | TC1784 | ✔ | ✔ | ✔ | ✔ | BENCH |
| BENZ | GETRAG | VGS-FDCT | TC1766 | ✔ | ✔ | ✔ | ✔ | BENCH |
| BENZ | GETRAG | VGS2-FCVT | TC1766 | ✔ | ✔ | ✔ | ✔ | BENCH |
| BENZ | BOSCH | VGS NAG3 (9G TRONIC) | ✔ | ✔ | ✔ | ✔ | BENCH |
OBDSTAR DC706 with TCM V30.09 read and write BENZ VGS2 FDCT TCM on bench:
Wiring diagram:
*The operation steps are the same as V30.01.
Benz GETRAG VGS/VGS2-FDCT TCM cloned with OBDSTAR DC706 on bench (with TCM V30.01)
http://blog.eobdtool.co.uk/benz-getrag-vgs-vgs2-fdct-tcm-cloned-with-obdstar-dc706-on-bench/
OBDSTAR DC706 with TCM V30.09 read and write Benz VGS2 FCVT TCM on bench:
Plug the power supply to DC706, keep charging and communication during the operation.
Menu path:
ECU Flasher>> TCM>> TCM V30.09>> BENZ GETRAG VGS2 FCVT TC1766 (BENCH)
Follow the Pinout to connect OBDSTAR DC706 ECU Tool and TCM with P004 Jumper and Adapter
After the harness connection is completed, start to connect ECU, and perform read/write operation.
Switch the ignition off and turn on
Connect to ECU successfully
Read INT eeprom, EXT eeprom, and INT flash- success
DC706 write INT eeprom, EXT eeprom, and INT flash- success
免责声明：本文中使用的图片均由博主自行发布，与本网无关，如有侵权，请联系博主进行删除。
下一篇: How to Read and Write VW DQ500 DQ380 TCM with OBDSTAR DC706 on Bench?
全部作者的其他最新博文
- • CG100X V1.5.1.0 Update and Free Download
- • Lonsdor K518 Pro LT20-10 Add 8A-BA Key to 2023 Toyota Landcruiser 300
- • Xhorse Multi Prog Read and Write MQB48/49/5C Dashboard Guide
- • FormulaFLash ECU Programmer Introduction
- • Program Geely Geometry E Proximity Keys and AKL with OBDSTAR X300 Classic G3
- • Lonsdor K518 Pro Update Skoda Auto IMMO Car Models
