注册 登录
美国中文网首页 博客首页 美食专栏

utihakou的个人空间 //www.sinovision.net/?582062 [收藏] [复制] [分享] [RSS]

分享到微信朋友圈 ×
打开微信,点击底部的“发现”,
使用“扫一扫”即可将网页分享至朋友圈。

How to Clone BMW MSV90 Engine Computer with Launch X431 ECU Programmer?

已有 226 次阅读2023-10-24 20:48 分享到微信

Confirmed! BMW MSV90 TC1796 engine computer can be cloned with Launch X431 ECU & TCU Programmer successfully, no need X431 tablet and X431 X-Prog3 programmer.

 

Main steps:

Step 1: Read EEPROM and Flash data of original engine computer

Step 2: Read EEPROM and Flash data of new engine computer

Step 3: Write original EEPROM and Flash data to new engine computer

 

Operation process:

Connect X431 ECU Programmer and computer via USB cable

Open X-431 ECU & TCU Programmer PC software

Input msv90 in the search box to quickly find the ECU model

x431 ecu programmer clone bmw msv90 1

Go to the main operation page

Click “Direct connection of diagram” to check the wiring diagram and connect Launch X431 ECU Programmer and the original MSV90 engine computer correctly

x431 ecu programmer clone bmw msv90 2 x431 ecu programmer clone bmw msv90 3

Click “Connect” to connect the ECU

x431 ecu programmer clone bmw msv90 4

Step 1: Read EEPROM and Flash data of original engine computer

Select the corresponding option to read the original EEPROM and Flash data separately

Save the data files after reading is successful

Click “Disconnect” to disconnect the original engine computer, and connect to the new one.

x431 ecu programmer clone bmw msv90 5 x431 ecu programmer clone bmw msv90 6

Step 2: Read EEPROM and Flash data of new engine computer

Repeat the same steps to back up the original EEPROM and Flash data of the new engine computer

x431 ecu programmer clone bmw msv90 7 x431 ecu programmer clone bmw msv90 8 x431 ecu programmer clone bmw msv90 9

Step 3: Write original EEPROM and Flash data to new engine computer

Select the EEPROM and Flash data file of original engine computer just saved in step 1 to write into the new BMW MSV90 engine computer in sequence

x431 ecu programmer clone bmw msv90 10 x431 ecu programmer clone bmw msv90 11 x431 ecu programmer clone bmw msv90 12

Read chip ID to check if the current ID is the same as the original engine computer

x431 ecu programmer clone bmw msv90 13

 

All operation is OK.

Finally, disconnect the ECU.

 

In addition, CGDI BMW (with professional OBD cable), CG FC200 (on bench), BMW AT200 (via OBD), and Yanhua ACDP with Module 27 (on bench) can read & write BMW MSV90 as well.

http://blog.eobdtool.co.uk/bmw-msv90-read-and-write-by-kt200-cgdi-bmw-fc200-at200-or-yanhua-acdp/

Foxflash also updated BMW MSV90 TC1796 Boot in January, 2023.

http://blog.eobdtool.co.uk/foxflash-update-adds-dcm6-2a-med17-series-bmw-msv90-boot-etc/

OBDSTAR DC706 Read and Write BMW MSV90 on bench perfectly.

https://youtu.be/7HKtJuCGsFQ

UK Professional OBD2 Tools Online Shop


免责声明:本文中使用的图片均由博主自行发布,与本网无关,如有侵权,请联系博主进行删除。







鲜花

握手

雷人

路过

鸡蛋

评论 (0 个评论)

facelist

您需要登录后才可以评论 登录 | 注册

 留言请遵守道德与有关法律,请勿发表与本文章无关的内容(包括告状信、上访信、广告等)。
 所有留言均为网友自行发布,仅代表网友个人意见,不代表本网观点。

关于我们| 节目信息| 反馈意见 | 联系我们| 招聘信息| 返回手机版| 美国中文网

©2024  美国中文网 Sinovision,Inc.  All Rights Reserved. TOP

回顶部