If Yanhua Mini ACDP-2 fails to connect PC via USB cable and appears no device found problem, how to solve? Check the available solution below.

Problem:

Connect ACDP2 host to computer via USB cable

Open PC-ACDP2 software and wait for dozens of seconds, but the device is still not connected.

Click “Settings >> PC bound to ACDP-II device”, but the device list is still without any information.

The solution:

This problem can be solved by modifying the device IP.

Step 1: Right-click the Network icon in the lower right corner of computer

Then click Open Network & Internet settings >> Change adapter options

Step 2: If you don’t know which Network is Mini ACDP 2, try to unplug and plug the USB cable of device once. You can see the ACDP2 network when inserting it.

Step 3: Right-click ACDP 2 network>> Properties>> Internet TCP/IPv4

Use the following IP address:

• IP address: 192.168.88.88
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.88.1

Use the following DNS server addresses:

• Preferred DNS server: 192.168.88.1

Enter the above device IP address and DNS correctly, and click OK.

Wait for a few seconds until the device automatically connects.

Successfully connected!

https://youtu.be/6Pnrp6ZR-OM

UK Professional OBD2 Tools Online Shop