博文
- 分享 How to Read Hyundai/Kia EDC17CP14 on Bench with PCMTuner/Foxflash ?
- One customer reported that he cannot read the Kia edc17cp14 by using PCMTuner with 71 module in bench mode. He tested on many ECUs but no results. Here is the suggestion from eobdtool.co.uk engineer. The following edc17cp14 pinout is for Hyundai/Kia. Do not try to read until the ID i ...
- 分享 How to Change VNCI 6154A Serial Number for ODIS Online Coding/Programming?
- 2023 VNCI 6154A VAG Diagnostic Tool covers all functions of the original VAS 6154A incl. DOIP/CAN FD protocol, online function, coding and programming, etc. for 1995-2023MY+ VW, Audi, Skoda, Seat, Bentley and Lamborghini. To make the online account can communicate with the original VAG factory se ...
- 分享 How to Use Super MB Pro M6+ to Test Benz and BMW Aicoder/E-sys?
- 2023 Super MB Pro M6+ is 100% compatible with the original Mercedes-Benz software. It not only can support BMW Aicoder, BMW E-sys and BMW App, but also support vehicles with DOIP communication protocol. Here are three tests on Benz and BMW with M6+. 1.Super MB Pro M6+ and HHT-WIN soft ...
- 分享 VAG EDC17C64 Read and Write: PCMtuner or Foxflash?
- Topic: Which ECU programmer can read and write VW Bosch EDC17C64? Here is the suggestion from eobdtool.co.uk engineer. The latest hot ECU programmers like PCMTuner and Foxflash both support. 1.By PCMTuner Magic Car Tool PCMTuner ECU Programmer can perform virtual rea ...
- 分享 What’s the Difference between Autel Maxisys Elite II Pro and Maxisys Elite II?
- Autel Maxisys Elite II Pro and Elite II are advanced MaxiSys line of smart diagnostic tools. They look the same on the hardware. What’s the difference between them? Maxisys Elite II Pro is the upgraded version of Maxisys Elite II. It’s equipped with higher OS (Android 10.0), SD card ...
- 分享 How to Activate V2023.03 MB SD C4 C5 Software?
- Newest V2023.03 MB SD C4 C5 software (Xentry/ DAS) comes with W223 W206 W213 W167 Software License for free (valid to August 10th), it’s compatible with MB SD C4 / C4 Plus / C5, OEM Benz C6 , Super MB Pro M6 and M6+ . Check how to activate the related software inside for using on Win10 P ...
- 分享 How to Select/Change Autel Diagnostic Scanners Language by yourself?
- Pre-selected language is supported for the Autel diagnostic scanners that were produced after March 1st 2023. You can choose the language by yourself when you get the Autel Tablet. There are only 2 chances to choose language by yourself. First chance is you need to choose language for the f ...
- 分享 VNCI 6154A Connection Method with WiFi and WLAN
- VNCI 6154A VAG diagnostic tool supports USB, WiFi and WLAN connections to diagnose VW, AUDI, Seat and SKODA cars. Check the guide to connect with WiFi and WLAN. 1.Connect via WiFi: https://www.youtube.com/embed/9SVmnEl83oE Connect VNCI 6154A interface and vehicle, and supply power t ...
- 分享 How to Install ODIS V10.0 and Update Firmware for VNCI 6154A?
- VNCI 6154A is the alternative solution of the original VAS 6154A VAG diagnostic tool. It’s compatible with the original ODIS V9.10 or above diagnostic software/ODIS Engineer V14.1 or above software, and works with the original driver, doesn't need driver manager, no need for third-party software ...
- 分享 FoxFlash Read Write Renault SID310 via OBD or Boot?
- Is it possible to use Foxflash ECU Programmer to read and write Renault sid310? via OBD, bench or boot? Here is the answer. OBD and Boot mode both are OK. 1.OBD Driver for Renault Master SID310 is available in foxflash software. Renault sid310 with foxflash by Tools Boot mode F ...
